Integration of unidirectional technologies into wireless back-haul architecture

This thesis was submitted for the degree of Docter of Philosophy and awarded by Brunel University.Back-haul infrastructures of today's wireless operators must support the triple-play services demanded by the market or regulatory bodies. To cope with increasing capacity demand, the EU FP7 project CARMEN has developed a cost-effective heterogeneous multi-radio wireless back-haul architecture, which may also leverage the native multicast capabilities of broadcast technologies such as DVB-T to off-load high-bandwidth broadcast content delivery. However, the integration of such unidirectional technologies into a packet-switched architecture requires careful considerations. The contribution of this thesis is the investigation, design and evaluation of protocols and mechanisms facilitating the integration of such unidirectional technologies into the wireless back-haul architecture so that they can be configured and utilized by the spectrum and capacity optimization modules. This integration mainly concerns the control plane and, in particular, the aspects related to resource and capability descriptions, neighborhood, link and Multi Protocol Label Switching (MPLS) Label-Switched Path (LSP) monitoring, unicast and multicast LSP signalling as well as topology forming and maintenance. During the course of this study we have analyzed the problem space, proposed solutions to the resulting research questions and evaluated our approach. Our results show that the now Unidirectional Technology (UDT)-aware architecture can readily consider Unidirectional Technologies (UDTs) to distribute, for example, broadcast content

Seamless integration of unidirectional broadcast links into QoS-constrained broadband wireless mesh access networks

Proceeding of: International Conference for Internet Technology and Secured Transactions ICITST 2009, London, U.K., 9-12 Nov. 2009Wireless Mesh Networks (WMNs) have matured in recent years. They allow two nodes to communicate via multiple hops when no direct connectivity exists. This allows community networks such as Freifunk [3] to provide affordable Internet access to their communities by sharing a few gateway nodes. Increasing demand for multi-media content poses a challenge for the typical WMN routing protocols such a Optimised Link State Routing (OLSR) which lack Quality of Service (QoS) support. Although, numerous solutions have been proposed to introduce QoS awareness such as [4], those WMNs fail to meet commercial operator requirements in term of reliability and QoS guarantees. In this paper we propose the seamless integration of Broadcast technologies such as Digital Video Broadcast (DVB) to introduce support for high-bandwidth multi-media services.European Community's Seventh Framework ProgramPublicad

QoS-aware flow monitoring and event creation in heterogeneous MPLS-based Wireless Mesh Networks supporting unidirectional links

Proceedings of: IEEE 9th Malaysia International Conference on Communications (MICC 2009), 15-17 December 2009, Kuala Lumpur, MalaysiaMonitoring is a crucial task in QoS-aware networks since it provides statistics to verify that the network performs within the committed QoS parameters. It is especially important in a resource-constrained Carriergrade Wireless Mesh Access Network (CG-WMAN) in order to monitor a node’s neighborhood, established links as well as MPLS QoS-traffic flows, so-called Label-Switched Paths (LSPs). In this paper, we present a monitoring architecture for LSPs in a heterogeneous CG-WMAN, where configurable Rating Agents perform adaptive per-LSP event creation based on monitoring statistics, QoS-requirements and overall network state. Keeping the footprint of the monitoring mechanism at a minimum, our approach is based on quasipassive monitoring minimizing the transmission of extra frames. To support unidirectional links as well as 1-to-N multicast trees, a receiving side feedback-free mechanism is proposed which can be extended with transmitting side functionality. Initial results obtained in our testbed show that we can reliably detect under-performing links according to the QoS requirements of the payload.European Community's Seventh Framework ProgramPublicad

Measurements and evaluations for an IEEE 802.11a based carrier-grade multi-radio wireless mesh network deployment

Proceeding of: The Fifth International Conference on Wireless and Mobile Communications, (ICWMC 2009), 23-29 August 2009, Cannes/La Bocca (France)Although there currently exists a number of Wireless Local Area Network based mesh network deployments most have been deployed to provide best effort broadband Internet access. Consequently, they cannot meet the requirements of network operators in order to utilise these networks to offer carrier grade services. The goal of providing carrier grade services over a wireless mesh infrastructure requires high performance in terms of throughput and reliability. One way of achieving this increase in performance is to utilise multi-radio Mesh Nodes, however, due to the Physical Layer layer limitations of 802.11a this can have significant problems. This paper analyses these issues and investigates what performance can be expected when frequency multiplexing is considered. The results presented in this paper are based on real measurements taken from multi-radio Mesh Nodes and are evaluated using statistical algorithms. The main contribution of this paper is an analysis of the impact of the Adjacent Channel Interference effect in 802.11a based multi-radio Mesh Nodes.European Community's Seventh Framework ProgramThis work was partially funded by the European Commission within the 7th Framework Program in the context of the ICT project Carrier-Grade Mesh Networks (CARMEN) (Grant Agreement No. 214994).Publicad

Outcome after PSMA-PET/CT-based salvage radiotherapy for nodal recurrence after radical prostatectomy

PURPOSE Nodal recurrent prostate cancer (PCa) represents a common state of disease, amenable to local therapy. PSMA-PET/CT detects PCa recurrence at low PSA levels. The aim of this study was to evaluate the outcome of PSMA-PET/CT-based salvage radiotherapy (sRT) for lymph node (LN) recurrence. METHODS A total of 100 consecutive patients treated with PSMA-PET/CT-based salvage elective nodal radiotherapy (sENRT) for LN recurrence were retrospectively examined. Patients underwent PSMA-PET/CT scan due to biochemical persistence (bcP, 76%) or biochemical recurrence (bcR, 24%) after radical prostatectomy (RP). Biochemical recurrence-free survival (BRFS) defined as PSA 1~ng/ml) with improved DMFS, respectively. No such association was seen for the number of affected lymph nodes. CONCLUSIONS Overall, the present analysis shows that the so far, unmatched sensitivity and specificity of PSMA-PET/CT translates in comparably high BRFS and DMFS after PSMA-PET/CT-based sENRT for patients with PCa LN recurrence. Concomitant ADT, duration of ADT, PSA value before sRT, and localization of LN metastases were significant factors for improved outcome

Genome analysis of the necrotrophic fungal pathogens Sclerotinia sclerotiorum and Botrytis cinerea

Sclerotinia sclerotiorum and Botrytis cinerea are closely related necrotrophic plant pathogenic fungi notable for their wide host ranges and environmental persistence. These attributes have made these species models for understanding the complexity of necrotrophic, broad host-range pathogenicity. Despite their similarities, the two species differ in mating behaviour and the ability to produce asexual spores. We have sequenced the genomes of one strain of S. sclerotiorum and two strains of B. cinerea. The comparative analysis of these genomes relative to one another and to other sequenced fungal genomes is provided here. Their 38–39 Mb genomes include 11,860–14,270 predicted genes, which share 83% amino acid identity on average between the two species. We have mapped the S. sclerotiorum assembly to 16 chromosomes and found large-scale co-linearity with the B. cinerea genomes. Seven percent of the S. sclerotiorum genome comprises transposable elements compared t

Genomic Analysis of the Necrotrophic Fungal Pathogens Sclerotinia sclerotiorum and Botrytis cinerea

Sclerotinia sclerotiorum and Botrytis cinerea are closely related necrotrophic plant pathogenic fungi notable for their wide host ranges and environmental persistence. These attributes have made these species models for understanding the complexity of necrotrophic, broad host-range pathogenicity. Despite their similarities, the two species differ in mating behaviour and the ability to produce asexual spores. We have sequenced the genomes of one strain of S. sclerotiorum and two strains of B. cinerea. The comparative analysis of these genomes relative to one another and to other sequenced fungal genomes is provided here. Their 38–39 Mb genomes include 11,860–14,270 predicted genes, which share 83% amino acid identity on average between the two species. We have mapped the S. sclerotiorum assembly to 16 chromosomes and found large-scale co-linearity with the B. cinerea genomes. Seven percent of the S. sclerotiorum genome comprises transposable elements compared to <1% of B. cinerea. The arsenal of genes associated with necrotrophic processes is similar between the species, including genes involved in plant cell wall degradation and oxalic acid production. Analysis of secondary metabolism gene clusters revealed an expansion in number and diversity of B. cinerea–specific secondary metabolites relative to S. sclerotiorum. The potential diversity in secondary metabolism might be involved in adaptation to specific ecological niches. Comparative genome analysis revealed the basis of differing sexual mating compatibility systems between S. sclerotiorum and B. cinerea. The organization of the mating-type loci differs, and their structures provide evidence for the evolution of heterothallism from homothallism. These data shed light on the evolutionary and mechanistic bases of the genetically complex traits of necrotrophic pathogenicity and sexual mating. This resource should facilitate the functional studies designed to better understand what makes these fungi such successful and persistent pathogens of agronomic crops

Quantifying Interference in WiLD Networks using Topography Data and Realistic Antenna Patterns

Avoiding possible interference is a key aspect to maximize the performance in Wi-Fi based Long Distance networks. In this paper we quantify self-induced interference based on data derived from our testbed and match the findings against simulations. By enhancing current simulation models with two key elements we significantly reduce the deviation between testbed and simulation: the usage of detailed antenna patterns compared to the cone model and propagation modeling enhanced by license-free topography data. Based on the gathered data we discuss several possible optimization approaches such as physical separation of local radios, tuning the sensitivity of the transmitter and using centralized compared to distributed channel assignment algorithms. While our testbed is based on 5 GHz Wi-Fi, we briefly discuss the possible impact of our results to other frequency bands

DCF modeling and optimization of long-distance IEEE802.11n point-to-point links

This work describes extensions to the well-known Distributed Coordination Function (DCF) model to account for IEEE802.11n point-to-point links. The developed extensions cover adaptions to the throughput and delay estimation for this type of link as well peculiarities of hardware and implementations within the Linux Kernel. Instead of using simulations, the approach was extensively verified on real-world deployments at various link distances. Additionally, trials were conducted to optimize the CWmin values and the number of retries to maximize throughput and minimize delay. The results of this work can be used to estimate the properties of long-distance 802.11 links beforehand, allowing the network to be planned more accurately

Quantifying the spectrum occupancy in an outdoor 5 GHz WiFi network with directional antennas

WiFi-based Long Distance networks are seen as a promising alternative for bringing broadband connectivity to rural areas. A key factor for the profitability of these networks is using license free bands. This work quantifies the current spectrum occupancy in our testbed, which covers rural and urban areas alike. The data mining is conducted on the same WiFi card and in parallel with an operational network. The presented evaluations reveal tendencies for various aspects: occupancy compared to population density, occupancy fluctuations, (joint)-vacant channels, the mean channel vacant duration, different approaches to model/forecast occupancy, and correlations among related interfaces